Microphone to RA with River Past Audio Capture, Microphone2RA recording

What is RA?

RealAudio was developed by RealNetworks and supports FM-stereo-quality sound. To hear a Web page that includes a RealAudio sound file, you need a RealAudio player or plug-in, a program that is freely available from a number of places.

More information is available on RealNetwork web site.

To convert other audio formats to RealAudio, you will need River Past RealMedia Booster Pack in addition to your audio software.

Launch River Past Audio Capture

Once River Past Audio Capture is installed properly, launch Audio Capture.

Set Sound Card Settings

Click on the toggle to the left of "Record from". The panel expands. Make sure the "Audio Device" combo box shows your sound card correctly, and select "Microphone" in the "Port" combo box.

Set Volume

You may leave the "Volume" to "Auto", or select "Manual" and adjust it yourself.

The "Volume" setting can be adjusted during the recording later.

Select output format

Use the setting panel on the bottom of the window to control the output format. Click on the toggle to the left of the "Format" label to expand the panel. Select "RA - RealAudio" as the "Audio Type".

Note: To convert to RealAudio, you must have River Past RealMedia Booster Pack installed.

You can change the audience, mode, complexity, sample rate, channel (stereo or mono) and bits/sample.

The audience specify the target audience of your video. Normally, it is based on the bitrate of quality. For example, to enable users of 256k DSL connection to play the video from internet, set the audience to "256k DSL or Cable". The choices for "Mode" are "Music" or "Voice".

Set Output File

Click on the toggle to the left of "Record to". The panel expands.

Click on the browse button to bring up the File Save dialog. enter the file name.

Record

Click the "Record" button to start recording.