DVR-MS to MPA: Extract Audio from DVR-MS(Microsoft Digital Video Recordin) Video to MPA(MPEG Audio) with River Past Audio Converter, DVR-MS2MPA converter, conversion
What is
DVR-MS?
DVR-MS (Microsoft Digital Video Recording) is a proprietary video and audio file format, developed by Microsoft. Video is encoded using the MPEG-2 standard and audio using MPEG-1 Layer II or Dolby Digital AC-3 (ATSC A/52). The format extends these standards by including metadata about the content and digital rights management. The extension was originally used by Zach Johnson who at the time was a developer for the television recording engine for Microsoft Windows XP Media Center Edition.
To convert DVR-MS video to other formats with River Past software, please
have GPL MPEG-2
Decoder installed.
What is
MPA?
There are three "layers" in the MPEG-1
Audio specification.
In MPEG Audio Layer-1, a simple 32-subband audio compressor using a floating
point representation for subband samples. Resolution and scale factor are stored
for groups of 12 subsamples. MP1 is only used for Philips DCC Digital Compact
cassette with data rates of 384 kbps.
Both MPEG-1 and MPEG-2 files use MPEG-1
Audio Layer-2.
MPEG-1 Audio Layer-3 becomes
the widely popular MP3.
MPEG.ORG is an excellent source for additional
information on MPEG format and usage.
To encode MPEG Audio, you will need River
Past MPEG-2 Booster Pack in addition to your audio software.
Additional Requirements
To extract audio from DVR-MS(Microsoft Digital Video Recordin) video to MPA(MPEG Audio) with River Past Audio Converter, you must have River Past MPEG-2 Booster Pack installed.
Launch River Past Audio Converter
Once River Past Audio Converter is installed properly, launch Audio Converter.
Add File
Click on the "Add File" button on the tool bar. The standard file open dialog appears. Select "DVR-MS - Microsoft Video Recording" in its "Files of type" combo box.
Select the file you want to convert and click "Open". The file will be added to the conversion file list.
Note: To convert from DVR-MS video, you must have GPL MPEG-2 Decoder installed.
River Past Audio Converter
Select Output Format
Use the setting panel on the bottom of the window to control the output format. Click on the toggle to the left of the "Format" label to expand the panel. Select "MPA - MPEG Layer-2" as the "Audio Type".
You can change the sample rate, channel (stereo or mono) and bits/sample, and bitrate.
Note: The MPEG-2 Booster Pack must be installed for the "MPA - MPEG Layer-2" output option to show.
Select output directory
Expand the "Output Directory" panel. Use the "Browse" button to select an output directory.
Convert
Click the "Convert" button on the tool bar.
River Past Audio Converter
