FLAC to MPA: Convert Audio from FLAC(Free Lossless Audio Codec) to MPA(MPEG Audio) with River Past Audio Converter, FLAC2MPA converter, conversion
What is
FLAC?
FLAC stands for Free Lossless Audio
Codec, an audio format similar to MP3, but lossless, meaning that audio
is compressed in FLAC without any loss in quality. This is similar to how Zip
works, except with FLAC you will get much better compression because it is designed
specifically for audio.
FLAC is a free lossless audio format. It differs from MP3, WMA, MP4 and other
formats with lossy compression because it does not cause quality loss. However,
the compression ratio is lower.
To convert FLAC audio to other formats with River Past software, you will
need to install either CoreFlac
or DC-Bass Decoder.
What is
MPA?
There are three "layers" in the MPEG-1
Audio specification.
In MPEG Audio Layer-1, a simple 32-subband audio compressor using a floating
point representation for subband samples. Resolution and scale factor are stored
for groups of 12 subsamples. MP1 is only used for Philips DCC Digital Compact
cassette with data rates of 384 kbps.
Both MPEG-1 and MPEG-2 files use MPEG-1
Audio Layer-2.
MPEG-1 Audio Layer-3 becomes
the widely popular MP3.
MPEG.ORG is an excellent source for additional
information on MPEG format and usage.
To encode MPEG Audio, you will need River
Past MPEG-2 Booster Pack in addition to your audio software.
Additional Requirements
To convert from FLAC(Free Lossless Audio Codec) to MPA(MPEG Audio) audio with River Past Audio Converter, you must have River Past MPEG-2 Booster Pack installed.
Launch River Past Audio Converter
Once River Past Audio Converter is installed properly, launch Audio Converter.
Add File
Click on the "Add" button on the tool bar. The standard file open dialog appears. Select "FLAC - Free Lossless Audio Codec" in its "Files of type" combo box.
Select the file you want to convert and click "Open". The file will be added to the conversion file list.
Note: To convert from FLAC files, you must have DB-Case Decoder installed.
If you cannot add the file, please verify that you have DC-Base Decoder installed.
River Past Audio Converter
Select Output Format
Use the setting panel on the bottom of the window to control the output format. Click on the toggle to the left of the "Format" label to expand the panel. Select "MPA - MPEG Layer-2" as the "Audio Type".
You can change the sample rate, channel (stereo or mono) and bits/sample, and bitrate.
Note: The MPEG-2 Booster Pack must be installed for the "MPA - MPEG Layer-2" output option to show.
Select output directory
Expand the "Output Directory" panel. Use the "Browse" button to select an output directory.
Convert
Click the "Convert" button on the tool bar.
River Past Audio Converter
